jschone
Dec 14, 10:57 AM
Hi,
Here is the problem:
I received my Powermac Quad today. The shop already installed 4 gb extra memory. (4x 1gb DDR2 Kingston).
When I started the computer for the first time, it went through al the setup screen, but the system "hang" on the last screen where I entered my personal information. After restarting the system, OSX came up.
I checked the system info and saw that the system only had 4 gb installed. The first slot of up and down where both empty. I checked inside, and saw that there ARE indeed the standard memory sims in there. ( 2 x 512 mb). They are not recognized by the system though.
There are 3 sims in the upper slots and 3 sims down, like it it is supposed to be ?!
Does anyone know what is going on here?
Kind Regards, Jochem
Here is the problem:
I received my Powermac Quad today. The shop already installed 4 gb extra memory. (4x 1gb DDR2 Kingston).
When I started the computer for the first time, it went through al the setup screen, but the system "hang" on the last screen where I entered my personal information. After restarting the system, OSX came up.
I checked the system info and saw that the system only had 4 gb installed. The first slot of up and down where both empty. I checked inside, and saw that there ARE indeed the standard memory sims in there. ( 2 x 512 mb). They are not recognized by the system though.
There are 3 sims in the upper slots and 3 sims down, like it it is supposed to be ?!
Does anyone know what is going on here?
Kind Regards, Jochem
mysterytramp
May 2, 08:59 PM
thanks for tips, both seem bit expensive ...
Then Google "rsync." You can run it free from terminal. Once you get the hang of its commands, you can wrap it in an AppleScript.
mt
Then Google "rsync." You can run it free from terminal. Once you get the hang of its commands, you can wrap it in an AppleScript.
mt
Santaduck
Nov 23, 12:09 PM
well it would be an odd trend with lots of underlying significance if MS made such a u-turn on the matter.
eljanitor
Apr 29, 05:15 AM
He's right you should try to put 512 MB in there if you're running 10.4 to get a little more performance. I think you can go up to 1.25 GB of RAM on that computer.
10.4 specs http://support.apple.com/kb/ht1514
10.4 specs http://support.apple.com/kb/ht1514
flosseR
Apr 24, 04:46 AM
ok i stand corrected. According to the tinternet you should be able to shoot it in manual but none of the TTL or iTTL functions will be available so you have to set everything yourself.
On a side note, I just tried this with a 580 EX 2 from a friend on my D7000 and it fired once, then several times not at all and then all of a sudden again for several shots before giving up again.
so your milage may vary with this approach. what DOES work is the wireless triggers which is nice but also there just manual and then only if you have another flash firing.
On a side note, I just tried this with a 580 EX 2 from a friend on my D7000 and it fired once, then several times not at all and then all of a sudden again for several shots before giving up again.
so your milage may vary with this approach. what DOES work is the wireless triggers which is nice but also there just manual and then only if you have another flash firing.
Hellhammer
Aug 10, 12:02 PM
That looks like a mix of Battlefield and Modern Warfares IMO. I'm not too excited, MW2 was good in the beginning but killstreaks killed it. I will likely buy this but I doubt it can offer something like CoD4 did
Blue Velvet
Jan 14, 11:08 AM
Thanks Blue Velvet that's the sort of thin I was looking for. I have found a foundry called Parachute (http://www.paratype.com) who specialise in multilingual fonts.
No worries. Quite like the slab serif on the Caption version of PT Serif in your link. Good luck with your project. :)
No worries. Quite like the slab serif on the Caption version of PT Serif in your link. Good luck with your project. :)
EvilC5
Apr 13, 08:14 PM
Start the capture and walk away?
It's a stack of tapes and the 2 I looked at only had like 10 min on them.
Oh well, gotta get done.
It's a stack of tapes and the 2 I looked at only had like 10 min on them.
Oh well, gotta get done.
iSaint
Nov 26, 08:59 AM
Is the 60g iPod a 4G color, or a 5G video? What's it's condition? Any pics of that and the mini?
adamsweeting
Apr 12, 07:37 AM
Plex basically is XBMC. It's a tweaked port.
Yeah, would be good to see 1080p supported in the iPad 3!
Yeah, would be good to see 1080p supported in the iPad 3!
mooseface
Apr 11, 10:41 AM
My awesome birthday cake made by my girlfriend!
http://i58.photobucket.com/albums/g247/anarchy_olly/IMG_0675.jpg
http://i58.photobucket.com/albums/g247/anarchy_olly/IMG_0675.jpg
OutThere
Jul 3, 06:41 PM
Ok, heres the deal-
I got DSL, ordered a bunch of networking stuff along with it. The focus is on the router/modem which directs our network of 3 computers. The router (made by 2wire-its a homeportal 1100) has 3 ways to connect to it, phoneline networking (HPNA), ethernet and USB. I need to connect with usb. The installed extensions that it came with don't seem to mesh with it. In the system profiler it says that it its driver is the USB communications extension, which doesn't seem to exist on my computer.I need the homeportal to use the extension that came with it...not some stuff that I dont have. is there any way to make it so that the homeportal is driven by the "Homeportal USB" extension? The homeportal shows up in the System profiler, but not in TCP/IP, where I need to select it so that I can get onto the internet. This kind of tells me that the USB port works. I already got a replacement portal, after spending way to many hours on the phone with 2wire tech support, and the situation is the same. I ahve already trashed the TCP/IP prefs, tried different USB cables, reinstalled about 25 times etc etc. but I just realized that it is posible that the portal just isnt using the right extensions.
Here is what the system profiler says about the homeportal:
Communication (2Wire USB Remote NDIS Ethernet)
Product ID: 66 ($42)
Vendor: Vendor 5680 (2Wire Inc)
Driver version: 1.0.2
Driver name: USB Communications Extension
Power (mA): 500 ($1f4)
Release number: 1.0
Serial number:
I hope that one of you can shed some light on this subject. Thanks!
I got DSL, ordered a bunch of networking stuff along with it. The focus is on the router/modem which directs our network of 3 computers. The router (made by 2wire-its a homeportal 1100) has 3 ways to connect to it, phoneline networking (HPNA), ethernet and USB. I need to connect with usb. The installed extensions that it came with don't seem to mesh with it. In the system profiler it says that it its driver is the USB communications extension, which doesn't seem to exist on my computer.I need the homeportal to use the extension that came with it...not some stuff that I dont have. is there any way to make it so that the homeportal is driven by the "Homeportal USB" extension? The homeportal shows up in the System profiler, but not in TCP/IP, where I need to select it so that I can get onto the internet. This kind of tells me that the USB port works. I already got a replacement portal, after spending way to many hours on the phone with 2wire tech support, and the situation is the same. I ahve already trashed the TCP/IP prefs, tried different USB cables, reinstalled about 25 times etc etc. but I just realized that it is posible that the portal just isnt using the right extensions.
Here is what the system profiler says about the homeportal:
Communication (2Wire USB Remote NDIS Ethernet)
Product ID: 66 ($42)
Vendor: Vendor 5680 (2Wire Inc)
Driver version: 1.0.2
Driver name: USB Communications Extension
Power (mA): 500 ($1f4)
Release number: 1.0
Serial number:
I hope that one of you can shed some light on this subject. Thanks!
wwooden
Apr 4, 09:54 PM
My goal is to find a USB dongle kit that I can use to make the xbox 360 Guitar Hero 2 guitar wireless. What I'm looking for is 2 USB dongles, similar to what come with many wireless mice. One would plug into the 360 console, the other would accept a mail USB cable from the guitar. I will then cut and shorten the USB cable on the guitar, add a battery pack for power, and an on/off switch.
I've been looking around but can't find a USB wireless kit like I am trying to find. Anyone have an idea of where I can look? Or am I just crazy in trying to do this?
I've been looking around but can't find a USB wireless kit like I am trying to find. Anyone have an idea of where I can look? Or am I just crazy in trying to do this?
gorskiegangsta
May 3, 10:13 AM
I would not recommend removing apps like Safari (let alone their system files) from the OS. Safari is an application that is bundled with Mac operating system and its system files may include a number of important services. It really doesn't take up that many resources anyway. Besides, I expect the OS will try to reinstall it via update anyway.
Old Tony
Apr 8, 03:39 AM
or getting robbed by a monkey in the wildlife park...
sivaprakash
Apr 29, 12:47 AM
Hi
What I am trying to do is, When user clicks Login button there should be a window (Panel) comes out till the user respond to that Panel he/she should not be allowed to access other part of application.
But when ever I add panel to NIB the action target always goes to parent window's ".m" file not Panel's class. Can you please explain me how to direct the control to Panel's class rather parent's.
Thanks
Siva
What I am trying to do is, When user clicks Login button there should be a window (Panel) comes out till the user respond to that Panel he/she should not be allowed to access other part of application.
But when ever I add panel to NIB the action target always goes to parent window's ".m" file not Panel's class. Can you please explain me how to direct the control to Panel's class rather parent's.
Thanks
Siva
Dane D.
Jun 16, 07:10 AM
Does it exist? If so, can someone give me a link? I'm getting a 233mhz G3 PM and want to put it to work.
For a baseline I installed and ran it under OS 8.6 on a 8600/200 PPC. This computer did nothing but crunch for 72 hrs to complete one work unit. So it does work, just real slooow. By the way, your 233 Mhz will take about 24 - 26 hrs to complete a unit. I have a B/W G3/300 that takes 22 - 24 hrs per unit. I also run two G4/450 that are crunching for 12 -14 hrs per unit. My son runs a eMac 1.25 Ghz take crunches a unit in about 7 - 8 hrs. An observation, I think SETI runs better in OS X than OS 9, slightly faster I think. Try it, the worst that can happen is it won't work but try it. My 2 cents.
For a baseline I installed and ran it under OS 8.6 on a 8600/200 PPC. This computer did nothing but crunch for 72 hrs to complete one work unit. So it does work, just real slooow. By the way, your 233 Mhz will take about 24 - 26 hrs to complete a unit. I have a B/W G3/300 that takes 22 - 24 hrs per unit. I also run two G4/450 that are crunching for 12 -14 hrs per unit. My son runs a eMac 1.25 Ghz take crunches a unit in about 7 - 8 hrs. An observation, I think SETI runs better in OS X than OS 9, slightly faster I think. Try it, the worst that can happen is it won't work but try it. My 2 cents.
PowerGamerX
Mar 7, 11:11 PM
If you're in a dorm for the love of Jobs don't get a Mini. If you live with the parentals or with only yourself, the Mini is great if you already plan on having an iPad.
Though, since you don't have a screen, keyboard, or mouse, it may be better to just fork over the extra cash for an iMac.
Though, since you don't have a screen, keyboard, or mouse, it may be better to just fork over the extra cash for an iMac.
m-dogg
Sep 15, 04:54 PM
Is this an inside joke or something? Cause I sure as heck don't get it...
Ugh - Make them go away!
There was a thread on these blue/green guys when they first started popping up at macrumors.com.
I think iGary started that one too. I am one of those who was and is still annoyed by them...
Ugh - Make them go away!
There was a thread on these blue/green guys when they first started popping up at macrumors.com.
I think iGary started that one too. I am one of those who was and is still annoyed by them...
vincenz
Apr 15, 05:33 PM
Go for a new computer. Doesn't sound like it's worth the headache.
tablo13
Dec 27, 01:33 AM
Wirelessly posted (Mozilla/5.0 (iPod; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B118 Safari/6531.22.7)
Belkin grip vue. Btw there is a big thread on this, just scroll down the accessories forum a bit.
Belkin grip vue. Btw there is a big thread on this, just scroll down the accessories forum a bit.
mbaquery
Apr 20, 10:43 AM
Hey guys:
I've gone through two 13" mbas (1.86/4gb, ultimate) and both have had inversion or pixel walk screen issues. Any time i scroll through webpages pixels will shift very subtely - for instance in macrumors archive those fine lines that box in posts will blur when actively scrolling up/down.
I can't find any definitive posts on what causes this aside from voltage issues w/lcd. The folks at genius bar were not helpful.
This site: http://www.lagom.nl/lcd-test/inversion.php has some examples. Another thread on the issue https://discussions.apple.com/thread/2675037?threadID=2675037&tstart=43
Does anyone know if this is an issue with all the 13'' mbas? It's a small issue but really bothers me, especially since I scroll and read through tons of text and the flickering becomes pretty apparent.
Any advice on solutions or general thoughts on what the issue is exactly would be appreciated.
At this point I'm going to try a third 13'' ultimate and see if I get the same problem.
I've gone through two 13" mbas (1.86/4gb, ultimate) and both have had inversion or pixel walk screen issues. Any time i scroll through webpages pixels will shift very subtely - for instance in macrumors archive those fine lines that box in posts will blur when actively scrolling up/down.
I can't find any definitive posts on what causes this aside from voltage issues w/lcd. The folks at genius bar were not helpful.
This site: http://www.lagom.nl/lcd-test/inversion.php has some examples. Another thread on the issue https://discussions.apple.com/thread/2675037?threadID=2675037&tstart=43
Does anyone know if this is an issue with all the 13'' mbas? It's a small issue but really bothers me, especially since I scroll and read through tons of text and the flickering becomes pretty apparent.
Any advice on solutions or general thoughts on what the issue is exactly would be appreciated.
At this point I'm going to try a third 13'' ultimate and see if I get the same problem.
Sky Blue
Apr 1, 09:06 AM
Everyone should be banned from the internet on April Fools Day.
chris curran
Feb 17, 03:20 AM
I have a mac osx and the internet explorer icon is on my desktop but I don't know how to also put it onto other family members desktop so that they can also use it. Any ideas.
0 Yorumlar